Everything you need for fishing

Home Page

Contact Us

Tips on Ordering and Policies

International Sales

UPS Tracking

Sale Items

Accessories -
Tools, Gaffs, Belts, Tackle Bags, Outdoor Gear etc.


Clothing-Hats, Shirts, Gloves, Vests etc

Fishing Line and Leaders

Fishing Lures
Saltwater and Freshwater

Fishing Reels

Fishing Rigs

Fishing Rods


Gift Ideas


Ice Fishing

Lure Making


Surgical Tubing



Umbrella Rigs

State Fishing Authorities

Worldwide Weather



Site Map

Prop 65 Warning for California Residents








Pro-Tec Lure and Jig Powder Paint by Component Systems

Closeout - Limited colors remaining

Pro Tec Powder Paint
Powder Paints were designed with ease of use in mind. You can now create beautiful, high-gloss, fluorescent lures quickly and easily. Simply heat the lure and swish it through the powder. It will amaze you as it glosses over before your eyes! When cool, simply tie it on your line and keep fishing. For a finish that's five times as tough, simply cure the painted lure by baking it in an oven for 15 minutes at 350 degrees F.


- Super high gloss
- One-coat coverage with no white primer needed
- No drying time
- Non-flammable and environmentally safe
- Will not dry out
- No mixing or settling
- No odor
- Easy cleanup

Available in 2 oz bottles

See below for instructions.
Item Colors
Click 'Add to Cart' to choose color
Price Secure
Only Yellow remains in stock

Yellow - 2 Jars


Available Colors - Colors are Approximate
This color chart does not do the fluorescent colors justice - they are very vibrant!

   White Pearl
   Green Chartreuse
   Yellow Chartreuse
   Hot Pink


Component Systems Instructions


Stir settled powder to make it fluffy and light. Some have found that working out of a small round bowl allows for easier application. To apply PRO-TEC POWDER PAINT to jigs, hold the jig by the hook with your fingers. Preheat jigs by rotating through the flame of a torch or your gas range using a small flame. Hook will stay cool. Rotate jig in the blue part of flame for 2 seconds for 1/16 oz. jigs, 4 seconds for 1/4 oz. jigs, and so on. You may also preheat jigs in a 325 degree F oven for 15 minutes or use a cigarette lighter.

Once hot, quickly swish the jig through light powder with a side to side motion to cover the entire surface. Do not dip or push jigs into power. Remove IMMEDIATELY. The surface will then melt and gloss over. If the jig smokes, reduce the preheat time slightly. If the jig appears powdery and dry, increase the preheat time. Continue to keep the powder loose and fluffy between painting.

Your jigs are now ready for use. However, curing the lure will produce an extremely durable, chip resistant finish. Jigs may be "cured' by hanging them in an oven at 350 degrees F for 15 minutes. Allow a few minutes for your jigs to get up to temperature. Lures with weed guards should be cured at 250 degrees F for 25 minutes. Always open the eye of the hook with a sharp object before curing.


Eyes can be painted on jigs using COMPONENT SYSTEMS liquid vinyl lure and jig finish. Use non-fluorescent colors such as black, red or yellow. If curing the jigs, eyes must be painted on afterward.

Two tone jigs can also be painted by dipping powder painted jigs in liquid vinyl paint for the second color. Since the jig now contains two coats of paint, there may be a tendency to drip if cured.


  • The powder painting technique may take a few tries to attain a desirable finish. But with a little practice, you'll be saving time and money while creating a product of the highest quality.
  • Always keep powder paint loose and fluffy.
  • Use a swishing motion to cover lures completely.
  • Remove jigs from powder IMMEDIATELY.
  • Experiment with preheating time for best results.

    Powder Coating - 4fishin.com


    Place your order through this site.

    Send e-mails to sales@4fishin.com  
    4fishin, P.O. Box 4502 Parker, CO 80134